Matteo Patacca on the podium in Vallelunga
The young ridert Matteo Patacca "Mao Mao" got two podiums in the last round of the CIV 2020 Championship.
Matteo takes part to the Campionato Italiano Velocità in the Moto 3 category with a KTM bike. Prisma Electronics is proud to be one of his sponsors.
Read the complete Blog post -->
Our Technical Partners in the Motorsport
Being a technical partner does not only mean supporting a team but above all means being able to work with the best people and the best professionals in the sector. This is the only way to grow up and keep up with the market in the motorsport world.
Supporting important teams in several categories, from Go-Kart to Touring cars, from Superbike to MotoGp championships allowes to test our instruments also in extreme condition.
Read the complete blog post -->
The idea behind the HPM4 products line
HiPreMa 4 - The full range of Tire pressure and Temperature gauges for the motorsport.
The basic idea is to create a series of accurate electronic instruments that can be customized according to your way of working on track.
Read the complete blog post -->
More about tire pressure and temperature gauges
In the world of motorsport every tenth of a second counts, every detail of the vehicle must be perfect. An incorrect set-up can cost several seconds on the track and make the difference between 1st and 5th place.
A very important aspect is the tire pressure. Tire pressure establishes the balance between rolling speed, traction, cornering speed. A low pressure allows for excellent vehicle traction while a high tire pressure provides a high stiffness of the carcass and therefore a high rolling speed.
Read the complete blog post -->
Measure the tire temperature with an Infrared Pyrometer
The measurement of the racing tire temperatures in the motorsport races is one of the most important aspect in the management of tires performance. The best mechanical grip of racing tire is ever in a narrow operating window and is fundamental to be able that the tread works in the correct temperature range for its maximum performance.
Read the complete blog post -->
How to check and Calibrate tire Pyrometer
How to check and calibrate tire Pyrometer.
In this video we show the procedure for checking and calibrating the digital tire pyrometer.
We use a Thermocouple Calibrator and we check all temperature values from 0°C to 1000°C.
Read the complete Blog post -->
New features of the HiPreMa 4 products line.
We have updated some features of the Hi.Pre.Ma. 4 products line.
By the Firmware 4.0.0. it is possible to set the saving sequence of tire pressures ; it is possible to set the sense of the rotation, Clockwise or AntiClockwise and also the tire from where to start the saving pressures sequence. Rear Right or Left tire - Front Right or Left tire.
Read the complete Blog post -->
Hoosier Tires
All Hoosier Tires are designed only for competition purposes. Proper break-in will not affect initial performance but will increase the competitive life of the tire.
Effect of track temperature in tire degradation
For many of us, minimal changes in temperature will go unnoticed. In Motorsport , however, small increases or decreases of even one or two degrees have a considerable impact on how teams approach a race or session...
The new products for the 2019
After two years of research, development and testing, we are ready to present our new instruments.
We are almost ready !!
Thanks to our customers, distributors, our technical partners that help us to improve our instruments, we have list all features of our products and we have started the new project from a blank sheet.
Prisma Electronics partner in the 2018 Mini Challenge Italian Championship with Alessio Alcidi
Party for the end of the 2018 Mini Challenge Italian Championship with the driver Alessio Alcidi. Prisma Electronics is proud to be partner of the Scuderia Speed Motor in this championship.
MotoGp and Superbike technical partner
Set up the Digital Degree Wheel 4
Using Digital Degree Wheel 4
Test with tire gauge HIPREMA 3 EVO
The best moments of the 2013
We wanted to show with a simple video a series of images and clips that sum up our 2013; In this year PRISMA ELECTRONICS has collaborated with great national and international partners linked to all sectors of motorsport.