Set up the Digital Degree Wheel 4
How to check the correct installation on kart engine of the Digital Degree Wheel 4
The Digital Degree Wheel 4 has a resolution accuracy of angle measurement of 0.1°. The installation of the instrument is a very important operation that must be performed with precision in order to avoid any errors and obtain an accurate measurement of the timing port engine.
After installing correctly the Digital Degree wheel 4 on the kart engine, it is possible to check its accuracy very quickly. It need to align the Rotor-Stator sign and reset the measure for having the 0.0° reference, rotate the crankshaft 2 or more turns until to re-align then, the measure obtained is multiple of 360.0°.
Performing the same operation in the opposite direction it is possible to return the crankshaft to the starting position and the Digital Degree Wheel 4 should shows the measure of 0.0°.
The video explains it.
That's all for now. Keep tuned and remember to follow us
If you want, leave your comments for the article below. Thanks !